Are you a DIY enthusiast or a professional contractor looking to change the blade on your Dewalt 20v Sawzall?
Look no further!
In this article, we will guide you through the process of changing the blade on your reciprocating saw step-by-step.
Whether you’re working on light construction or demolition projects, the Dewalt 20v Sawzall is a versatile tool that can handle a wide range of applications.
With its brushless motor and variable speed trigger, this saw delivers the cutting power and maneuverability needed to tackle even the toughest projects.
So, let’s get started and learn how to change the blade on your Dewalt 20v Sawzall!
How To Change Blade On Dewalt 20v Sawzall
Step 1: Safety First
Before you begin, make sure to turn off the saw and remove the battery. This will prevent any accidental start-ups and keep you safe while changing the blade.
Step 2: Locate the Yellow Lever
On the right-hand side of the saw, you should see a yellow lever near the end where the blade goes in. This lever is used to release and secure the blade.
Step 3: Release the Blade
Lift up the yellow lever to release the blade. Wear gloves to protect your hand and pull the blade straight out.
Step 4: Insert the New Blade
Take your new blade and insert it into the saw with the teeth pointing down. Make sure it is securely in place.
Step 5: Secure the Blade
Push down on the yellow lever to secure the new blade in place. Make sure it is locked in properly before continuing.
Step 6: Reinsert Battery
Once you have completed changing the blade, reinsert the battery into the saw.
Congratulations! You have successfully changed the blade on your Dewalt 20v Sawzall. Remember to always follow safety precautions and wear protective gear when using power tools. With its brushless motor and variable speed trigger, your Dewalt 20v Sawzall is ready to tackle any project you have in mind.
Gather Your Tools And Safety Gear
When changing the blade on your Dewalt 20v Sawzall, it is important to gather the necessary tools and safety gear beforehand. Here’s what you’ll need:
Tools:
– New blade
– Gloves
Safety Gear:
– Eye protection
– Ear protection
– Dust mask
Make sure to wear the appropriate safety gear to protect yourself from any flying debris or loud noises. Additionally, gloves will protect your hands while handling the blade. Having a new blade ready to go will make the process smoother and more efficient. With these tools and safety gear in hand, you’re ready to change the blade on your Dewalt 20v Sawzall with ease.
Disconnect The Battery And Remove The Blade
To begin the blade changing process, disconnect the battery from your Dewalt 20v Sawzall. This is an important safety measure that will prevent the saw from accidentally starting up while you are working on it. To remove the battery, locate the release button on the back of the saw and slide it to the side. The battery should then come free from the saw.
Next, you will need to remove the blade from your saw. Look for the yellow lever on the right-hand side of the saw near the end where the blade goes in. This lever is used to release and secure the blade. Lift up on the yellow lever to release the blade from the clamp.
It is important to wear gloves when removing the blade, as it may still be hot from use. Pull the blade straight out of the clamp and set it aside.
With the blade removed, you can now inspect the shaft of your saw for any damage. Hold up your saw and sight down the shaft from the front of the saw. If it is not straight with the surrounding frame, refer to your “Shaft Repair Guide” for repair instructions.
Once you have inspected your saw and removed the old blade, you are ready to install a new one. Follow steps 4-6 in our guide above to insert and secure your new blade, then reinsert your battery and get back to work.
Choose And Install The New Blade
Choosing the right blade for your Dewalt 20v Sawzall is essential for achieving a clean and efficient cut. Dewalt offers a variety of blades for different materials and cutting applications, such as metal, wood, and demolition.
When selecting a new blade, consider the thickness and hardness of the material you will be cutting. For thicker materials, choose a blade with fewer teeth per inch (TPI) to prevent the blade from overheating and breaking. For softer materials, such as wood, choose a blade with more TPI to achieve a smoother cut.
Once you have chosen the appropriate blade, it’s time to install it. Start by turning off the saw and removing the battery. Then, locate the yellow lever on the side of the saw near the blade clamp. Lift up the lever to release the old blade.
Insert the new blade into the saw with the teeth facing downward. Make sure it is securely in place before pushing down on the yellow lever to lock it in place.
It’s important to note that some Dewalt Sawzall models offer a tool-free blade release feature, which allows for quick and easy blade changes without needing to use a lever or any other tools.