Are you tired of dealing with a constantly running Sloan flush valve?
Or maybe you need to service the unit and want to know how to shut off the water flow without turning off the entire building’s water supply?
Look no further! In this article, we’ll walk you through the steps to shut off a Sloan flush valve and make any necessary repairs.
With just a few tools and some basic knowledge, you’ll be able to tackle this task like a pro.
So, let’s get started!
How To Shut Off Sloan Flush Valve
The first step in shutting off a Sloan flush valve is to locate the control stop. This stop can be used to disable the water flow to the flushometer when servicing the rest of the unit.
To access the control stop, simply remove the stop cap and turn the stop screw clockwise until it can’t turn anymore. This will shut off the water flow to the flush valve.
Next, flush any remaining water from the unit and proceed with your repairs. When you’re finished servicing the unit, open the control stop again by turning the stop screw in the opposite direction until it can fully open once more.
It’s important to note that if you’re shutting off the water flow to a Sloan valve for repairs, you’ll also need to turn off the water supply to the valve using an adjustable wrench.
To do this, remove the cap covering a shutoff screw located just to the right or left of the cup that houses the valve. Use a screwdriver or wrench to tighten the screw under the cap to turn off the water supply to the valve.
Once you’ve completed your repairs, turn on the water supply and test the valve for any leaks or issues.
Identifying The Sloan Flush Valve
In order to properly identify a Sloan flush valve, there are a few different methods you can use. One way is to look for the identification sticker on the bottom backside of the valve body. This sticker should have information about the model number and other identifying details.
Another way to identify a Sloan flushometer is to look for the model number engraved on OEM Sloan repair parts such as the vacuum breaker, cap, and cover. This can help you ensure that you’re ordering the correct replacement parts for your specific Sloan flush valve.
It’s also important to note that there are different types of Sloan flush valves, including exposed and concealed models for both water closets and urinals. The water consumption label attached to the flushometer and fixture can also provide important information about the specific model you’re working with.
By using these identification methods, you can ensure that you have the correct information and replacement parts needed to properly service your Sloan flush valve.
Shutting Off The Water Supply To The Valve
If you need to shut off the water supply to a Sloan flush valve, there are a few steps you can take. First, locate the main water shutoff valve for your home or building. This valve is typically located outside the home in the front, side or backyard, or may be located in your garage. The master shutoff valve shuts off water to the entire building.
Once you have located the main shutoff valve, turn it clockwise until the water is completely off. To verify that you have successfully turned off the water to your building, open a faucet or test a working supply or fixture inside the building.
Next, locate the control stop for the Sloan flush valve. This stop can be used to disable the water flow to the flushometer when servicing the rest of the unit. To access the control stop, simply remove the stop cap and turn the stop screw clockwise until it can’t turn anymore. This will shut off the water flow to the flush valve.
If you’re shutting off the water flow to a Sloan valve for repairs, you’ll also need to turn off the water supply to the valve using an adjustable wrench. To do this, remove the cap covering a shutoff screw located just to the right or left of the cup that houses the valve. Use a screwdriver or wrench to tighten the screw under the cap to turn off the water supply to the valve.
Once you’ve completed your repairs, turn on the water supply and test the valve for any leaks or issues. Remember to open the main shutoff valve slowly and clear any air from the water lines by running a faucet or hose-bib next to it until all air is released.